Boston, 21st-24th October 2025
Organiser: Emilio Baglietto
List of papers presented
KEYNOTE LECTURE
How to Harness the Powers of Machine Learning for Unprecedented Advances in Multiscale Modeling of Multiphase Flows
“Bala” Sivaramakrishnan, University of Florida, USA
Flow Structure and Heat Transfer Characteristics of Falling Film with Nucleate Boiling on an Inclined Plate
H. Asano, Kobe University, Japan
The effect of reduced pressure on flow boiling and condensation of low-boiling-point refrigerants
M. Pysz, Gdańsk University of Technology, Poland
Stability of two-phase stratified flows in circular pipes
Barmak Ilya [et al.]
Time at Temperature: Post-Critical Heat Flux Modeling and Experimental Challenges
J. Pacheco Duarte, University of Wisconsin, USA
Rising Bubble Clusters near an Inclined Wall
S. Takagi, The University of Tokyo, Japan
Effect of surface finish on R245fa flow boiling in horizontal stainless steel minichannels under high pressure
Y. Berton, INSA Lyon, France
Deformation and size effects on the lateral migration of particles in square channel flows
K. Sugiyama, Osaka University, Japan
Numerical Simulations of Gas-Liquid-Solid Flows
G. Tryggvason, Johns Hopkins University, USA
Toward Efficient and Accurate Bubble Cloud Collapse Simulation
K. Okita, Nihon University, Japan
Interface Capturing Simulations of Nuclear Engineering Problems with the Massively Parallel FEM Code PHASTA
I. Bolotnov, North Carolina State University, USA
High-Fidelity Multi-Scale Modeling Framework for Predicting Turbulent Spray Atomization
Desjardins Olivier [et al.]
Active and Passive techniques for enhancing pool boling in normal and reduced gravity
Di Marco Paolo [et al.]
Multi-scale modeling and simulation of fluid-structure interaction in rains
Y. Ling, University of South Carolina, USA
Study on Entrained Gas Flow Rate by Bathtub Vortex
K. Ito, Japan Atomic Energy Agency, Japan
Numerical investigation of the early stage of drop spreading on a solid substrate
D. Legendre, University of Toulouse, France
Imaging stresses in two-phase flows: polarization-based measurements around particles and bubbles
Y. Tagawa, Tokyo University of Agriculture and Technology, Japan
Flow Boiling Heat Transfer Under High Reduced Pressures: Applications, Experimental Data, and a New Mechanistic Model
G. Ribatski, University of São Paulo, Brazil
KEYNOTE LECTURE
Advances in AI-based Two-Phase Flow Regime Classification and Synthetic Flow Image Generation
S. Miwa, The University of Tokyo, Japan
A New Parameter for Thermodynamic Suppression Effect of Cavitation considering of Local Heat Transfer
Y. Iga, Tohoku University, Japan
Testing Drift-flux Correlations in Periodic Transients
T. Zhang, Ohio State University
Possible Influence of Nucleation Site Density on Bubble Release Frequency in Subcooled Flow Boiling
T. Okawa, The University of Electro-Communications, Japan
Behavior of chain bubbles rising in a gallium alloy under a horizontal magnetic field
H. Murakawa, Kobe University, Japan
Solidification Dynamics and Interfacial Pattern Formation in Molten Metal Drop Impact
M. Shirota, Hirosaki University, Japan
Image Analysis of the Atomization Process of a Liquid Jet Injected through Coaxial Twin-Fluid Atomizer by Deep Learning
A. Sou, Kobe University, Japan
Heat transfer and liquid film thickness measurements during condensation of R1233zd(E) inside a 3.4 mm channel under different gravity conditions
S. Bortolin, University of Padova, Italy
The formation and properties of bubble emulsions in microgravity
R. Zenit, Brown University, USA
Internal Structure of Air-Lift Three-Phase Pipe Flow Investigated by Ultrasound Echo Imaging and Doppler Velocimetry
Y. Murai, Hokkaido University, Japan
Advances in Understanding of Counter-Current Slug Flow Behavior
M. Mikuž, Jožef Stefan Institute, Slovenia
Contaminated Heterogeneous Bubbly Flow in Cylindrical Column
K. Hayashi, Kobe University, Japan
Life of a single bubble growing within an electric field in microgravity: some results of the Reference Multiscale Boiling Investigation
P. Di Marco, Pisa University, Italy
High-Performance Pool Boiling on Silicon Wafers Using Micropillar Arrays Fabricated by Laser Powder Bed Fusion
A. Garivalis, Pisa University, Italy
Pool boiling of water on single and tandem tubes at 3-5 kPa
B. Zajaczkowski, Wroclaw University of Science and Technology
KEYNOTE LECTURE
From Boiling to Cryogenics: The Role of Two-Phase Flow in Sustainable Aviation
C. Falsetti, TU Delft, The Netherlands